Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Repair & Sealing Across Coppell
Duct repair and sealing in Coppell typically runs $280-$650 for most homes, with full-system sealing on larger two-story houses reaching $890-$1,400. We dispatch crews to Coppell from our Dallas-Fort Worth office, and most repair visits are scheduled within 2-3 business days. Call (940) 290-8552 for a written estimate before any work starts.
We’ve worked in Coppell since 2013, and the pattern is consistent: a homeowner schedules what they think is a standard duct cleaning, our camera goes in, and we find disconnected flex-duct runs, collapsed liners, or supply boots pulling 140°F attic air straight into the bedroom. The cleaning was the appointment. The sealing was the actual fix. Our Duct Repair & Sealing team documents everything with before-and-after photos of every run, delivered as part of the standard job record.
Why CleanRun Air Duct Cleaning Frisco Is Coppell’s Preferred Duct Repair & Sealing Company
Coppell homeowners research before they call. We built our process around that.
Every job starts with a written price under Haven Standard Clause 1 - no exceptions, no “call for a quote.” Our technicians are background-checked, uniformed, and identified by name before arrival, operating under Haven Standard Clause 3: Verified Crews. The 365-Day Done Right Promise is backed in writing on every job, not buried in a policy manual.
We’ve served 52,000+ homes since 2013, every one with a documented photo record. In Coppell specifically, our crews know the housing stock: the 1990s-era two-stories in Riverchase, the early-2000s builds in Canyon Ridge, the large brick homes in Coppell Woods with complex multi-zone systems and flex-duct attic runs now past their 25-year mark. That local knowledge changes what we find and how we fix it.
Our Free Second Opinion policy means you can bring any competitor’s written estimate; we’ll put our number next to it in writing. No charge.
Our Duct Repair & Sealing Services in Coppell
Duct Sealing
Most Coppell homes lose 20-30% of conditioned air through leaks at plenum seams, boot collars, and register connections. We seal with mastic compound and foil tape rated for North Texas attic conditions - not duct tape, which degrades in months under Coppell’s 140°F summer peaks. A typical single-system sealing job in Coppell runs $280-$450; multi-zone homes with complex trunk lines run $650-$890. Every sealed joint is photographed before and after.
Flex Duct Repair
Coppell’s dominant housing wave of 1990s-early-2000s construction left thousands of homes with original flex-duct systems now 20-35 years old. The inner liners degrade in attic heat, shed fiberglass fibers, and eventually collapse or disconnect at the boot. We replace damaged runs with new R-8 insulated flex duct, reconnect at the plenum with mechanical fasteners and mastic sealant, and photograph the full length. Single-run replacement in Coppell: $180-$340. Multiple runs or full trunk replacement: $550-$1,200.
Metal Duct Repair
Older Coppell homes and custom builds sometimes have galvanized steel trunk lines. We repair separated seams, corroded sections, and failed dampers with sheet-metal patches, S-cleats, and sealed joints. Metal duct repair in Coppell typically runs $320-$580 depending on accessibility and extent.
Duct Insulation & Air Leak Repair
Unconditioned Coppell attics destroy duct insulation. We wrap repaired trunks with foil-faced fiberglass insulation rated for extreme temperatures, seal all penetrations with mastic, and verify with pressure testing where indicated. Full trunk insulation and sealing on a large Coppell two-story: $890-$1,400.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Coppell
Our equipment roster includes professional-grade tools from trade-recognized brands: Rotobrush and Nikro for mechanical cleaning, Abatement Technologies for negative-pressure HEPA containment, and Honeywell and Aprilaire components for filtration and control upgrades. We stock common repair parts for Coppell’s most prevalent systems, so most sealing and repair jobs finish in one visit without waiting on supply-house orders.
Common Duct Repair & Sealing Problems We See in Coppell Homes
- Collapsed 1990s flex-duct liners. The inner plastic liner in original Coppell flex duct turns brittle after 25+ summers above 140°F. It cracks, sheds fibers into the airflow, and eventually collapses into the hose shape until the run disconnects or blocks entirely. We find this in attics across Riverchase, Canyon Ridge, and Coppell Woods.
- Airport-corridor carbon staining. Coppell’s western and northern neighborhoods sit directly against DFW International Airport’s perimeter. Our technicians routinely find dark gray carbon staining around supply registers from jet exhaust particulate infiltration - a fingerprint that doesn’t show up in Carrollton or Flower Mound duct work. The staining marks leaks: particles enter through unsealed joints and deposit where conditioned air exits.
- Disconnected supply boots in two-story homes. Coppell’s large 2,500-4,500 sq ft two-stories have long flex-duct runs to second-floor registers. Thermal expansion and vibration loosen boot collars over years. The homeowner feels “weak airflow upstairs” - our camera finds the boot blowing attic air into the wall cavity.
- Mold-favorable wet spots after spring storms. Coppell’s heavy spring pollen load - cedar, elm, and oak - combined with post-storm humidity spikes creates ideal conditions inside leaky duct insulation. Unsealed joints pull humid attic air across cooled surfaces; the resulting moisture feeds mold growth on organic debris trapped in degraded liner fibers.
Pricing for Duct Repair & Sealing in Coppell, TX
We publish ranges because Haven Standard Clause 1 requires a written price before any work starts. Here’s what duct repair and sealing costs in Coppell’s market:
| Service | Typical Range in Coppell |
|---|---|
| Single-system mastic sealing (plenum, boots, accessible joints) | $280-$450 |
| Multi-zone or complex trunk sealing | $650-$890 |
| Single flex-duct run replacement | $180-$340 |
| Multiple flex-duct runs or partial trunk replacement | $550-$1,200 |
| Metal duct repair (seams, sections, dampers) | $320-$580 |
| Full trunk insulation + complete sealing (large two-story) | $890-$1,400 |
Factors that move Coppell jobs toward the higher end: homes over 3,500 sq ft with multiple HVAC systems, attic access limited by vaulted ceilings or tight truss spacing, and extensive liner degradation requiring source removal before sealing can begin. Every estimate is free, written, and delivered before any panel comes off. Call (940) 290-8552.
We Also Serve Cities Near Coppell
Our crews work Coppell regularly and also handle duct repair and sealing in Lewisville, Carrollton, Grapevine, and Flower Mound. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office; crews serve all five cities from the same equipment roster and under the same H.A.V.E.N. Standard.
Serving Coppell, TX - Our Local Coverage Area
We’re based in the Coppell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Coppell
The dark gray staining is jet exhaust particulate and runway rubber dust entering through leaks in your duct system. Coppell’s western and northern neighborhoods sit directly against DFW International Airport - one of the world’s busiest airports - exposing residential duct systems to elevated particulate levels uncommon in Carrollton or Flower Mound. The carbon deposits mark where unfiltered air is leaking into your supply ducts and exiting at the registers. Sealing the leaks stops the infiltration and prevents the staining from returning. Call (940) 290-8552 for a camera inspection and written estimate.
Most 1990s-era flex duct in Coppell needs at least partial replacement, not just sealing. The inner plastic liner degrades after 25+ summers in 140°F attics; it becomes brittle, sheds fibers, and eventually collapses or disconnects. Sealing alone won’t fix a liner that’s shedding into your airflow. Our camera inspection determines which runs can be sealed and which need replacement - we document both and give you a written scope before any work starts. Single-run replacement in Coppell runs $180-$340; full-system replacement on a large two-story can reach $2,800-$4,500.
Coppell attic temperatures routinely exceed 140°F, which degrades standard duct tape in months and accelerates mastic curing. We use high-temperature mastic compounds and foil tape rated for extreme conditions, and we schedule extensive attic work during morning hours when possible. The same heat that destroyed your original liner means sealing materials must be specified for the actual environment, not the label default. Our crews carry heat-rated products from Guardsman and other trade brands specifically for North Texas attic conditions.
Yes. Our sealing and repair protocols follow NADCA Assessment, Cleaning, and Restoration (ACR) standards for containment, mechanical agitation, and post-work verification. We document compliance with before-and-after photos of every run, included as a standard deliverable on every job. The photo record is your verification that sealing was performed at the joints specified in your written scope, not just stated on the invoice.
Yes, significantly. Coppell’s heavy spring pollen load - cedar, elm, and oak - enters duct systems through leaks on the return side and at unsealed supply boots. Sealing those pathways blocks the bulk of particulate infiltration. After sealing, the only pollen entering your system passes through your HVAC filter, which is designed to handle it. Homeowners in Canyon Ridge and Riverchase who’ve had full sealing report reduced dust accumulation on registers and less frequent filter loading. The improvement is measurable in before-and-after pressure tests, which we include in your job record.
In the Riverchase area near the airport perimeter, our crew pulled a disconnected 1996-era flex-duct run off a second-floor supply boot in a 3,400 sq ft two-story - the inner liner had shed and the run was blowing attic air straight into a bedroom. After a camera inspection and source removal under negative pressure with HEPA filtration, we reconnected the run, mastic-sealed the boot collar and plenum seams, and wrapped the trunk in the 140°F attic with foil-faced insulation. The homeowner received before-and-after photos of every run and a written scope showing exactly what was found and what was fixed.
Ready for a written estimate? Call (940) 290-8552. We’ll schedule a camera inspection, deliver a fixed price before any work starts, and back the job with our 365-Day Done Right Promise in writing.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Coppell since 2013.