Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrusted HVAC Cleaning for Frisco Homeowners
HVAC cleaning in Frisco typically costs $280-$650 for a complete system service and takes 2-4 hours depending on which components need attention. CleanRun Air Duct Cleaning Frisco has delivered written prices before work starts and documented photo records after every job since 2013. Call (940) 290-8552 for a free estimate with no obligation.
Frisco’s rapid growth means tens of thousands of homes built between 2015 and 2025 are running HVAC systems through construction dust, cottonwood from the nearby Trinity River basin, and the fine caliche soil that blows through Collin County every spring. We’ve cleaned systems in Stonebriar, Phillips Creek Ranch, Newman Village, and the Rail District as part of our Frisco HVAC Cleaning service, and the pattern is consistent: the evaporator coil in a 2019 build often carries a debris load that the original installer never addressed. Our crews photograph every component before touching it, then again after cleaning, so you see what was actually in your system and what changed. That’s Haven Standard Clause 1: Written Price Before Work Starts, and it’s been non-negotiable since our first job.
We’re independently owned and operated under the Haven Standard, led by Tomas Reyes. Every technician is background-checked, uniformed, and identified by name before arrival. The equipment on our trucks includes Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman units, all professional-grade tools you can verify independently. Our 365-Day Done Right Promise is backed in writing on every job, not stated in marketing copy and forgotten. If the work isn’t right, we make it right.
What Our HVAC Cleaning Service Includes
Evaporator Coil Cleaning
The evaporator coil sits inside your air handler and removes heat from indoor air as refrigerant passes through its fins. In Frisco, we regularly find coils clogged with a gray paste of construction dust, pollen, and pet dander that hardens during our 100-degree July stretches and restricts airflow by 30% or more. CleanRun removes the coil assembly when accessible, applies foaming cleaner formulated for aluminum fins, and rinses with low-pressure water to avoid fin damage. We photograph the coil face before and after, and the photo record shows you exactly which fins were impacted and which are now clear.
Blower Cleaning
The blower wheel, also called the squirrel cage, pushes conditioned air through your ductwork; when its blades collect debris, the motor draws more amperage and your utility bill climbs without any temperature improvement. We see this most often in Frisco homes with return air filters that were upgraded to high-MERV ratings without resizing the return duct, which starves the blower and pulls bypass debris past the filter. Our crew removes the blower assembly, cleans each blade with compressed air and soft brushes, balances the wheel on its shaft, and documents the amp draw before reassembly. The photo record includes a close-up of the blade profile before and after.
Condenser Cleaning
The condenser coil lives in your outdoor unit and releases heat collected from inside your home; its aluminum fins are exposed to cottonwood seed, grass clippings, and the limestone dust that settles across Frisco’s western neighborhoods near the tollway. A dirty condenser raises head pressure, strains the compressor, and can trip high-pressure safety switches on the hottest afternoons. We power down the unit at the disconnect, remove the fan assembly when the design allows, and clean the coil from the inside out with foaming cleaner and a fin comb for any bent rows. The photo record shows the coil condition and any fin damage we corrected.
Air Handler Cleaning
The air handler is the metal box that houses your blower, evaporator coil, and often your electric heat strips or furnace heat exchanger; it’s the central station where all airflow converges, and debris here distributes to every room. In Frisco’s newer subdivisions like HVAC Cleaning in Frisco and HVAC Cleaning in Prosper, we find air handlers with drywall dust from incomplete construction cleanup that has caked onto the interior surfaces for years. CleanRun vacuums the cabinet with HEPA-filtered negative-pressure extraction, wipes all accessible surfaces, and inspects the drain pan for algae or cracks that could cause water damage. Every surface is photographed before and after.
Heat Exchanger Cleaning
The heat exchanger is the metal chamber in your gas furnace where combustion heat transfers to indoor air without mixing the two gases; soot or corrosion here reduces efficiency and, in extreme cases, can allow carbon monoxide into your ductwork. We inspect heat exchangers with a borescope camera, clean accessible surfaces with soft brushes and vacuum, and document any cracks, rust spots, or soot patterns that indicate incomplete combustion. If we find a compromised heat exchanger, we stop work, show you the image, and explain why furnace replacement is the only safe path forward. This is not a sales tactic; it’s a safety duty we don’t delegate.
Coil Treatment
After mechanical cleaning, we apply a non-acidic coil treatment that inhibits microbial growth on the evaporator and condenser coils without leaving a residue that attracts new debris. This is particularly valuable in Frisco, where high summer humidity creates condensate conditions that support mold and bacteria on continuously wet surfaces. The treatment we use is compatible with aluminum, copper, and fin stock, and we document the application in your job record with time-stamped photos. It’s not a substitute for cleaning, but it extends the interval before the next service is needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for HVAC Cleaning
We’ve serviced hundreds of Honeywell air handlers and electronic air cleaners in Frisco homes, particularly the media cabinet models installed by builders in the 2016-2020 construction wave. We stock Honeywell OEM filters and understand the pressure-drop characteristics of their FC100A and FC200A media, which matters when you’re upgrading from a 1-inch disposable to a 4-inch pleated without recalculating static pressure.
Aprilaire humidifiers and air cleaners are common in the higher-end builds of Starwood and The Trails, and we’ve cleaned their Model 5000 electronic air cleaners and 600-series humidifier pads as part of full HVAC service calls. We also work with Abatement Technologies portable HEPA units and Guardsman coil coating products when the job specification calls for them. Whether you have Honeywell, Aprilaire, or any other make, we can help. Our technicians carry manufacturer literature for the brands we encounter most often, and we don’t guess at specifications.
BeforeAfterSigns You Need HVAC Cleaning Right Now
- Your utility bill has climbed 15% or more year-over-year without a rate increase. Dirty coils and blowers force your system to run longer cycles to achieve the same temperature, and the extra runtime shows up in kilowatt hours before you notice comfort degradation. We measure amp draw and static pressure to confirm whether the mechanical system or the building envelope is the culprit.
- You smell musty or sour odors when the blower first starts. This usually indicates microbial growth on the evaporator coil or in the drain pan, where standing water and organic debris create conditions for bacteria and mold. The odor is the volatile organic compound off-gassing; the photo record shows you the biological film responsible.
- Some rooms never reach the thermostat setpoint while others overcool. Uneven airflow often traces to a blower wheel caked with debris on one side, or a coil partially blocked so that the bypass air takes the path of least resistance. We map static pressure across the system to locate the restriction before disassembling anything.
- You see dust collecting on supply registers within days of cleaning. If the registers are dirty, the ductwork upstream is dirtier, and the source is often a blower or coil that’s shedding accumulated debris into the airstream. The photo record shows you the component that’s feeding the problem.
- Your system short-cycles, especially in cooling mode. A dirty condenser can’t reject heat efficiently, so head pressure rises and the high-pressure switch shuts the compressor off prematurely. The indoor temperature doesn’t satisfy, the thermostat calls again, and the cycle repeats. We clean the condenser and measure subcooling to verify proper operation before leaving.
Our HVAC Cleaning Process - Step by Step
- 1
Written price delivered on site, before work begins. Our technician arrives in a marked vehicle, introduces themselves by name, and inspects your system to determine the scope. You receive a written price for the exact work proposed, with line items for each component. Haven Standard Clause 1: no exceptions, no “call for a quote,” no estimate ranges that balloon later. The price you approve is the price you pay.
- 2
System shutdown and safety lockout. We disconnect power at the breaker and outdoor disconnect, verify zero energy state with a multimeter, and place lockout-tagout devices where required. For gas furnaces, we close the gas valve and verify pilot or igniter status. This is non-negotiable; we don’t clean live equipment.
- 3
Component removal and photographic documentation. Each component scheduled for cleaning is photographed in place, then removed when the design allows. We use a borescope for heat exchangers and other fixed components. The “before” images are time-stamped and uploaded to your job record in real time.
- 4
Mechanical cleaning with professional-grade equipment. Coils are foamed and rinsed; blower wheels are brushed and air-washed; condensers are cleaned from the inside out; cabinets are HEPA-vacuumed. We use Rotobrush contact cleaning for duct runs when they’re part of the scope, and Nikro or Abatement Technologies negative-pressure extractors for debris removal. Every tool is named in your written record.
- 5
Reassembly, operational test, and “after” documentation. Components are reinstalled with proper torque on fasteners, the system is powered on, and we measure temperatures, pressures, and amp draws against manufacturer specifications. The “after” photos are captured, the photo record is delivered to you as a standard deliverable, and the written warranty is signed before we leave.
How Much Does HVAC Cleaning Cost in Frisco?
A typical evaporator coil cleaning in Frisco runs $280-$380 for a standard residential air handler, while a complete system cleaning that includes coil, blower, condenser, and air handler runs $480-$650 depending on accessibility and contamination level. Heat exchanger cleaning adds $120-$180 when done as part of a furnace service, and coil treatment is $85-$125 as an add-on to any cleaning service.
Several factors move the price within these ranges. Systems in attics during July, or in crawl spaces with limited headroom, take longer to access and cost more. Heavy construction debris or pet hair accumulation requires additional cleaning cycles. Multi-zone systems with multiple air handlers are priced per unit, though we discount the second and subsequent units on the same visit. Homes in Frisco’s older sections near downtown, built before 2005, sometimes have duct configurations that require custom access panels, and we quote that work specifically rather than surprising you mid-job.
The way to avoid overpaying is to reject any quote that won’t commit to a written price before work starts, or that prices “per vent” or “per return.” Those structures are designed to escalate. CleanRun’s price is flat per system, agreed in writing, and includes the documented photo record as a standard deliverable. Our Free Second Opinion on Any Written Estimate means you can bring us a competitor’s quote and we’ll put our number next to it, line item by line item, with no cost or obligation.
Every estimate includes the full scope of work, the equipment to be used, and the 365-Day Done Right Promise. Call (940) 290-8552 for an exact quote; estimates are free and carry no obligation to schedule.
HVAC Cleaning Near Frisco - Our Service Area
CleanRun Air Duct Cleaning Frisco serves homeowners throughout Collin and Denton counties, including HVAC Cleaning in The Colony, Little Elm, Plano, Allen, McKinney, Celina, Lewisville, Far North Dallas, Carrollton, and Richardson. Most Frisco appointments are scheduled within 3-5 business days, and we route crews by neighborhood to minimize drive time between jobs. If you’re in Prosper or Celina, we typically book a morning slot to allow travel time without compressing the work. All calls are answered by a live person, 24/7, and we confirm your appointment with technician name and arrival window the evening before.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - HVAC Cleaning in Frisco
HVAC cleaning targets the mechanical components that heat, cool, and move air, including the evaporator coil, blower, condenser, air handler, and heat exchanger; air duct cleaning addresses the distribution pathways between those components and your rooms. You can have clean ducts and a dirty coil, or vice versa, and many Frisco homeowners benefit from both services scheduled together. The photo record for an HVAC cleaning shows the inside of your air handler and coil, not just the duct walls.
A single-component cleaning, such as an evaporator coil, takes 1.5-2 hours; a complete system cleaning with coil, blower, condenser, and air handler takes 3-4 hours in most Frisco homes. Heat exchanger cleaning adds 45-60 minutes when included. We don’t rush the operational test at the end; if pressures or temperatures are outside manufacturer specification, we diagnose why before leaving. Call (940) 290-8552 to schedule; we’ll confirm the expected duration when we deliver your written price.
HVAC cleaning in Frisco ranges from $280 for a single-component service to $650 for a complete system cleaning, with most homeowners paying $380-$520 for coil and blower combined. The exact price depends on system accessibility, contamination level, and whether multiple air handlers are involved. We deliver a written price before any work starts, every time, with no per-vent pricing or post-arrival upsells. Call (940) 290-8552 for a free estimate.
Yes, we clean and service Honeywell air handlers, media cabinets, and electronic air cleaners, as well as Aprilaire humidifiers, air cleaners, and ventilation controls. We stock common Honeywell and Aprilaire consumables and can source OEM parts for less common models with a short lead time. Our technicians carry manufacturer documentation for these brands and don’t improvise procedures. If you have a different brand, we research the specifications before arriving.
We don’t classify HVAC cleaning as an emergency service; it’s a scheduled maintenance procedure that improves efficiency and air quality over time. If your system has failed completely, we can clean components as part of a diagnostic and repair call, but our focus is on thorough, documented work rather than speed. For urgent cooling issues in Frisco’s summer heat, we recommend a diagnostic visit to identify whether cleaning or repair is the appropriate response. Call (940) 290-8552 and we’ll route you to the right service.
Every HVAC cleaning is backed by our 365-Day Done Right Promise: if the work is not right, we make it right, documented in writing on every job record. Haven Standard Clause 5 specifies that warranty claims are handled by the original crew or their direct supervisor, not routed through a call center. The photo record serves as the baseline; if a component we cleaned shows the same contamination pattern within 365 days, we return and address it at no charge. This is a written guarantee, not a policy subject to manager approval.
Clear a 3-foot workspace around your indoor unit, typically in a closet, attic, or garage, and ensure we can access your electrical panel and outdoor condenser without moving vehicles or storage items. We bring drop cloths and shoe covers, so floor protection is our responsibility. If you have pets, we ask that they be secured during the visit; our technicians carry identification and will call before entering if a gate code is required. We’ll confirm any specific preparation when we call to confirm your appointment.
Schedule Your HVAC Cleaning Service in Frisco Today
Call (940) 290-8552 to speak with a live person, 24/7, and schedule your free estimate. You’ll receive a written price before any work starts, a documented photo record of every component cleaned, and the 365-Day Done Right Promise in writing. No per-vent pricing. No post-arrival surprises. Just accountable work you can verify.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Frisco, serving Frisco, HVAC Cleaning in Prosper, The Colony, and surrounding communities since 2013.