Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Air Duct Cleaning in Richardson, TX
HVAC cleaning in Richardson typically runs $350-$650 for a whole-system job, with most homes in the Canyon Creek and Arapaho corridor falling toward the upper half due to original 1970s ductwork and clay-soil separation at plenum joints. We’re CleanRun Duct Repair & Cleaning, and we dispatch crews to Richardson from our Dallas-Fort Worth office. Every job starts with a written price before any panel comes off, and every duct run is photographed before and after. Call (940) 290-8552 for a free estimate.
Why Richardson Homes Are Different
Richardson’s suburban buildout peaked between the late 1960s and early 1980s, leaving a dense stock of ranch-style and traditional brick homes - particularly in established neighborhoods like Canyon Creek - with original duct systems now 40-55 years old. North Texas’s expansive black clay soil causes continual slab movement that stresses and separates flex-duct joints at plenums and boots, compounding debris buildup in ways newer, more geologically stable markets don’t see.
This combination of aged ductwork and soil-driven mechanical stress makes Richardson’s residential duct cleaning work more technically involved than in the newer master-planned subdivisions of Allen or Frisco to the north. Technicians working older Canyon Creek and Arapaho-corridor homes regularly find that the expansive clay soil has shifted the slab enough to pull flex-duct connections loose at the air handler plenum - meaning a routine cleaning job often reveals an undiagnosed conditioned-air loss problem that has been quietly inflating the homeowner’s Oncor bill for years.
Our Main Richardson Services
Richardson homeowners call us most often for these three services, each with its own dedicated page:
Air Duct Cleaning in Richardson
Whole-system negative-pressure extraction for the attic-run flex duct and sheet-metal trunk lines common in Richardson’s 1965-1985 housing stock. We photograph every run before and after, and clay-soil separation at boots is flagged during the inspection. Air Duct Cleaning in Richardson.

Dryer Vent Cleaning in Richardson
Lint extraction from dryer exhaust runs, including rooftop terminations common on Richardson’s single-story ranch homes. Blocked vents are a documented fire hazard; we clean to NFPA standards and photograph the full run. Dryer Vent Cleaning in Richardson.

Duct Repair & Sealing in Richardson
Reconnection of separated flex-duct joints, boot sealing, and metal trunk repair for systems damaged by slab movement or age. We quote repair scope in writing before work begins. Duct Repair & Sealing in Richardson.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterHVAC Cleaning in Richardson

Richardson’s summers routinely push 100°F for weeks at a stretch, meaning central AC systems run nearly continuously from May through September - dramatically accelerating dust and microbial accumulation on coils and blowers compared to moderate climates. Winter cedar pollen events and spring tree pollen from Richardson’s mature, tree-lined neighborhoods also drive heavy particulate infiltration into return-air systems, coating evaporator coils with adhesive debris that reduces heat transfer and raises Oncor usage. HVAC Cleaning addresses the components a standard duct cleaning cannot reach.
Evaporator Coil Cleaning
Signs you need it
Ice formation on the coil, weak airflow from registers, or AC running continuously without reaching setpoint during Richardson’s July-August heat peaks.
What it costs in Richardson
Evaporator coil cleaning in Richardson typically ranges $180-$320.
How we do it
We access the coil through the plenum, apply foaming cleaner, rinse with low-pressure water, and photograph the before and after condition for the job record.
Blower Cleaning
Signs you need it
Vibration or noise from the air handler, uneven airflow between rooms, or dust puffing from registers when the system cycles on.
What it costs in Richardson
Blower assembly cleaning in Richardson typically ranges $150-$280.
How we do it
We remove the blower wheel and motor, clean each vane and the housing with compressed air and solvent, balance the assembly, and document with photographs.
What HVAC Cleaning Costs in Richardson
| Item | Typical range in Richardson |
|---|---|
| Evaporator coil cleaning | $180-$320 |
| Blower assembly cleaning | $150-$280 |
| Full HVAC cleaning (coil + blower + air handler) | $350-$650 |
Can HVAC cleaning lower my electric bill in Richardson?
Yes - a coated evaporator coil or clogged blower can reduce system efficiency by 15-25%, which translates to measurable Oncor savings during Richardson’s five-month cooling season. Call (940) 290-8552 for an exact quote - estimates are free.
How do I know the coil was actually cleaned?
Every CleanRun job includes a Documented Photo Record of the coil condition before and after, delivered as part of your standard job record - Haven Standard Clause 2.
Air Quality & Sanitizing in Richardson

Richardson’s mature tree canopy and prolonged AC season create conditions for microbial growth inside duct systems that rarely dry out completely between May and September. The same 1970s-era flex duct with porous inner liners traps moisture at sag points and crushed sections, particularly in Canyon Creek homes where original installation standards did not include slope drainage. Air Quality & Sanitizing targets the biological load that mechanical cleaning alone cannot address.
Mold Treatment
Signs you need it
Musty odor when AC cycles on, visible growth at registers, or aggravated allergies during Richardson’s humid summer months.
What it costs in Richardson
Mold treatment for a typical Richardson system ranges $400-$750.
How we do it
We apply an EPA-registered antimicrobial through the duct system using a fogging manifold, treat the plenum and coil pan, and provide post-treatment lab documentation on request.
UV Light Installation
Signs you need it
Recurring microbial growth after cleaning, or a household with allergy-sensitive occupants in a high-AC-usage home.
What it costs in Richardson
UV-C light installation in Richardson typically ranges $350-$600 per unit.
How we do it
We mount a Honeywell or Aprilaire UV lamp in the supply plenum, wire to the blower circuit for automatic operation, and verify irradiance with a meter.
What Air Quality & Sanitizing Costs in Richardson
| Item | Typical range in Richardson |
|---|---|
| Mold treatment (whole system) | $400-$750 |
| UV-C light installation | $350-$600 |
| Bacteria sanitizing (per system) | $250-$450 |
Is mold treatment safe for pets and kids?
We use EPA-registered products with published re-entry times; the home is safe to occupy four hours after treatment, and we document the product SDS in your job record. Call (940) 290-8552 for an exact quote - estimates are free.
How long does UV light last?
UV-C lamps degrade to 70% output at roughly 9,000 hours - about one Richardson cooling season plus shoulder months - and we note replacement due dates on your job record.
Brands We Service in Richardson
We stock parts and service equipment from Nikro, Honeywell, Aprilaire, and Abatement Technologies, with most common filters, UV lamps, and plenum hardware available same-day through our Dallas-Fort Worth supply chain. our brands.
Pricing for Air Duct Cleaning in Richardson, TX

| Service | Typical range in Richardson |
|---|---|
| Whole-system air duct cleaning | $300-$550 |
| Dryer vent cleaning | $120-$200 |
| Duct repair & sealing (minor) | $200-$400 |
| Duct repair & sealing (extensive) | $500-$900 |
| Evaporator coil cleaning | $180-$320 |
| Blower assembly cleaning | $150-$280 |
| Full HVAC cleaning | $350-$650 |
| Mold treatment | $400-$750 |
| UV-C light installation | $350-$600 |
| Bacteria sanitizing | $250-$450 |
Richardson’s older housing stock and clay-soil separation issues push some jobs toward the upper end, particularly when repairs are needed at plenum joints or crushed flex sections. Every price is written and agreed before work starts - Haven Standard Clause 1 - with no per-vent add-ons or post-arrival upsells.
Neighborhoods We Serve in Richardson
We work across Richardson’s full residential footprint, with crews typically arriving within scheduled windows coordinated from our Dallas-Fort Worth office. Representative neighborhoods include:
- Canyon Creek
- Heights Park
- Arapaho East
- Springridge Estates
- Richland Park
Service Area - Cities Near Richardson

Our crews serve the full Dallas-Fort Worth metro from the same dispatch office, including Plano, TX to the north, Garland, TX to the east, Carrollton, TX to the west, and Allen, TX to the northeast. Pricing and standards are consistent across the service area; only the specific housing conditions and soil types vary.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Richardson

No - residential duct cleaning does not require a city permit in Richardson. Duct repair or modification that alters the HVAC footprint may trigger a permit; we flag this during the written estimate if applicable.
We typically schedule within 3-5 business days, with flexibility for homeowners in Canyon Creek, Heights Park, and other established neighborhoods. All calls are answered by a live person, 24/7, at (940) 290-8552.
Yes - removing accumulated pollen and debris from the duct system reduces recirculation of winter cedar and spring tree pollen that infiltrates Richardson’s mature neighborhoods through return-air pathways.
We provide written scope and insurance documentation on request for HOA submission; our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews.
Every CleanRun job concludes with a Documented Photo Record of every duct run, coil, or treated surface - before and after - delivered as a standard deliverable, not an upgrade.
Yes - we inspect plenum and boot connections as part of every duct cleaning, and we quote any needed reconnection or sealing in writing before proceeding, under Haven Standard Clause 1.
We provide a Free Second Opinion on any written estimate - bring us the competing quote and we put our number next to it in writing, no obligation.
Every job is backed by the 365-Day Done Right Promise: if it’s not done right, we make it right - backed in writing, not subject to manager approval.
Call (940) 290-8552 for a free estimate. Written price before any work starts. Documented Photo Record on every visit. Backed by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richardson Customers Say
"My allergies genuinely improved. They also told me the ducts did not need sealing, which I had been quoted for elsewhere."
- Petra K."The dryer vent was almost completely blocked with lint. They showed me the photograph and I understood immediately why the dryer had been running twice."
- Lucia M."Flat price agreed up front, no per-vent add-ons at the end. That was the whole reason I did not call the coupon company."
- Suzanne B.




Before
After
Before
After