Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in The Colony, TX | CleanRun Air Duct Cleaning Frisco
Air Duct Cleaning - The Colony for Trane systems typically runs $380-$620 for a complete system, depending on whether your home still has original 1980s fiberglass duct board or updated flex runs. We are an independent service provider, not affiliated with or authorized by Trane, and we’ve worked on Trane XB, XR, and XV systems in The Colony since 2013. The one thing that sets our Trane work apart here is how we account for The Colony’s specific combination of Lake Lewisville humidity and Blackland Prairie clay soil movement, which damages ductwork differently than in newer inland suburbs. Call (940) 290-8552 for a written estimate before any work starts.
Why The Colony Residents Choose Us for Trane Service
We’ve cleaned and repaired Trane systems in The Colony long enough to recognize the patterns. The XB13 that came standard in 1987 tract homes off Paige Road. The XR16 that replaced it in the early 2000s. The XV18 variable-speed units that run almost continuously through July and August when the heat index pushes 110°F. Our crews know how Trane’s all-aluminum coils behave when condensate pans crack, and we stock OEM Trane blower motors and control boards for same-day replacement when that’s the right call.
Tomas Reyes, our owner, grew up in the Bronx and learned the trade at Bronx Community College before running HVAC and duct crews across the Northeast. He’s been overseeing CleanRun operations in this area for well over a decade, including regular work in The Colony’s Starwood neighborhood where older construction hides surprising debris accumulation. The habit of showing before-and-after photos without being asked started early and never went away. “The photo is already on your phone before I say what it costs.” That’s how we work.
Every job follows Haven Standard Clause 1: written price before any work starts, every time. No exceptions. We also include a Documented Photo Record of every duct run, delivered as part of your standard job record, and back everything with our 365-Day Done Right Promise in writing.
Trane sales & service from CleanRun means independent expertise with documented results, not manufacturer-marketing language.
Common Trane Air Duct Cleaning Problems We Solve in The Colony
- Fiberglass duct board delamination in Trane air handlers. The Colony’s 1980s and 1990s tract homes came with Trane systems paired to fiberglass duct board whose foil facing separates in Lake Lewisville’s high humidity. Moisture gets trapped between layers, and mold colonizes along the plenum and trunk runs. We remove the degraded board, mastic-seal replacement connections, and photograph every step.
- All-aluminum evaporator coil condensate issues. Trane XR and XV series coils are prone to condensate pan cracks and drain-line clogs. Standing water wicks into nearby flex duct, causing mold at the collar connection. Our evaporator coil cleaning service addresses this before it requires full duct replacement.
- Variable-speed blower overload from duct damage. Trane XV18 and XV20i systems ramp to high static pressure when attic flex duct sags or pulls apart at elbows, which happens regularly in The Colony as Blackland Prairie clay shifts slab foundations and torques attic platforms. The blower runs longer, pulls more clay dust into the return, and accelerates lining erosion.
- Outdoor condenser coil debris loading. The Colony’s 100°F+ summers force near-continuous operation from June through September. Cottonwood from Lake Lewisville and grass debris collect on condenser coils, raising head pressure and pulling unfiltered air through compromised return chases.
- Disconnected supply runs from structural movement. On slab homes throughout The Colony, seasonal clay expansion and contraction gradually pulls flex duct joints apart at sharp elbows. Our video inspection catches this before cleaning begins, turning what looks like a routine service call into a documented repair.
BeforeAfterTrane Service in The Colony: What Local Conditions Mean for Your Equipment
The Colony presents a problem you won’t find in Frisco or Prosper: an entire city built out in concentrated waves between the mid-1970s and mid-1990s, meaning the ductwork vintage is unusually uniform and almost all of it is now 30-50 years old. The Blackland Prairie expansive clay beneath these slab-on-grade homes shifts with rainfall cycles, and that movement doesn’t just crack driveways. It torques attic platforms and interior chases, pulling flex duct joints apart at elbows where technicians can’t see from below. We regularly find Trane supply runs completely disconnected in attics that look fine from the driveway. Combine this with Lake Lewisville’s elevated humidity, which drives condensation inside unconditioned attic duct runs during the long cooling season, and you get a specific failure pattern: mold at the plenum, debris at the breaks, and a Trane variable-speed blower working overtime against static pressure it wasn’t designed to fight. No generic Trane page accounts for this. No generic The Colony page understands how Trane’s equipment responds to it.
The Colony service area coverage from CleanRun includes video inspection to find these hidden disconnections before we quote any cleaning work.
Trane Models & Products We Service in The Colony
We work on Trane equipment found across The Colony’s housing stock, from surviving Tempo and Weathertron-era systems in original 1970s builds to newer XR and XV installations. Specific lines we service include:
- Trane XR series (XR14, XR16) split systems - common in The Colony’s 2000s replacement wave
- Trane XB series (XB13, XB14) split systems - the standard in 1980s and 1990s original construction
- Trane XV series (XV18, XV20i) variable-speed systems - increasingly common in recent replacements, but fighting old ductwork
- Trane Tempo / Weathertron-era equipment - still running in some original The Colony homes, though most are at end-of-life
For critical components like control boards and blower motors, we use OEM Trane parts when the homeowner wants to preserve matched-system performance. For flex duct, mastic, and coil cleaning, we use quality aftermarket equivalents from Guardsman, Honeywell, and Aprilaire that meet or exceed OEM specification. On 30-50-year-old systems, if we find a cracked heat exchanger or failed compressor, we’ll tell you honestly: repair money is better put toward replacement. We don’t sell equipment, so that opinion comes without commission bias.
Trane Service Pricing in The Colony
Complete Trane air duct cleaning in The Colony ranges from $380 to $620 for a typical single-system home. What drives the cost:
| Service Component | Price Range |
|---|---|
| Whole-system air duct cleaning (standard) | $380-$480 |
| Whole-system cleaning + evaporator coil service | $480-$620 |
| Flex duct repair or replacement (per run) | $120-$280 |
| Video inspection with Documented Photo Record | Included standard |
Homes with original fiberglass duct board typically land at the higher end, as delaminated board requires more careful handling and often partial replacement. We deliver a written price before any work starts, under Haven Standard Clause 1, and include before-and-after photos of every duct run as a standard deliverable. No per-vent pricing. No coupon bait-and-switch. Call (940) 290-8552 for an exact quote on your Trane system - estimates are free, and we provide a Free Second Opinion on any competitor’s written estimate.
Serving The Colony, TX - Our Local Coverage Area
We’re based in the The Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in The Colony
It can usually be cleaned if the fiberglass duct board hasn’t delaminated or crumbled. We run a video inspection first. If the board’s foil facing is intact and the trunk isn’t sagging, negative-pressure extraction with Rotobrush and Nikro equipment removes accumulated debris safely. If the board has turned to powder at the plenum or mold has penetrated the lining, we quote replacement of the affected sections in writing before any demolition. Call (940) 290-8552 and we’ll show you exactly what the camera found.
It’s likely fighting high static pressure from damaged ductwork. The XV18 and XV20i ramp blower speed to maintain airflow when returns are restricted. In The Colony, we regularly find flex duct pulled apart at elbows or crushed by shifted attic platforms, forcing the blower to run at maximum speed almost continuously. The system never reaches setpoint efficiently, and the increased cycle rate pulls more Blackland Prairie clay dust through compromised returns. Our video inspection identifies the restriction; repair and cleaning restore normal modulation. Call (940) 290-8552 for a static pressure check.
Yes, for critical components where matched-system performance matters: control boards, blower motors, and specific sensors. For flex duct, mastic, and cleaning chemicals, we use aftermarket equivalents from Abatement Technologies, Guardsman, and Honeywell that meet or exceed OEM specification. We explain which category each needed part falls into before you approve the written price. We are an independent service provider and are not affiliated with, authorized by, or endorsed by Trane.
The Colony’s position on Lake Lewisville’s southern shore pushes relative humidity 8-12% higher than inland DFW suburbs on still summer nights. That moisture condenses inside unconditioned attic duct runs, especially where Trane’s fiberglass duct board has any gap in its foil facing. We find mold colonization at plenum connections far more frequently here than in Frisco or Prosper, and the condensation accelerates rust on Trane all-aluminum coil drain pans. The lake also deposits cottonwood debris on outdoor coils that inland homes don’t see. These aren’t hypotheticals; we document them on every job.
Often, yes. For accessible upflow and horizontal configurations common in The Colony’s slab homes, we remove the blower assembly and access panel, then clean the coil in place with foaming cleaner and low-pressure rinse, capturing runoff with a specialized drain pan. Downflow units in tighter closet installations may require partial disassembly. We photograph the coil condition before quoting the approach, and the written price covers the full scope before work begins. Call (940) 290-8552 to schedule a coil inspection with your The Colony Dryer Vent Cleaning.
Service Areas Near The Colony
CleanRun crews work throughout The Colony and surrounding communities. We handle Trane systems regularly in Trane service in Frisco, where newer construction presents different ductwork challenges, and Trane service in Prosper, with its mix of established neighborhoods and recent builds. We also serve Little Elm, Plano, and Allen from our Frisco-based operation.
Book Your Trane Service in The Colony Today
Call (940) 290-8552 to speak with a live person and schedule your Trane air duct cleaning. We’ll deliver a written price before any work starts, document every duct run with before-and-after photos, and back the job with our 365-Day Done Right Promise. Haven Standard Clause 1. No exceptions.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Frisco, serving The Colony since 2013.