Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAprilaire HVAC Cleaning in Frisco: What to Know First
We provide independent Aprilaire HVAC cleaning in Frisco, TX, for air handlers, evaporator coils, blower assemblies, and condenser units. Most jobs are completed in a single scheduled visit, with a written price delivered before we touch a single panel. In Frisco, we regularly see Aprilaire systems in homes built between 2015 and 2022, especially in Starwood and Newman Village where the tight construction envelopes trap debris that standard filter changes never reach.
This page is for homeowners who want their Aprilaire equipment cleaned without voiding the warranty, without per-vent bait-and-switch pricing, and with a photo record proving the work happened. Call (940) 290-8552 for a written estimate.
How Aprilaire Products Fail - and How We Fix Them
- Model 5000 Electronic Air Cleaner: The ionizing wires and collection cells load with fine particulate faster than passive media filters, especially during Frisco’s spring pollen surges. When airflow drops, the blower works harder and the coil runs warmer. We remove the cells, clean them with manufacturer-specified solution, verify wire tension, and photograph the cell stack before reassembly.
- Model 600/700 Humidifier Series: The water panel evaporator and distribution tray scale with North Texas hard water, restricting airflow across the humidifier pad and forcing the blower to compensate. We descale the tray, replace the panel with OEM or Guardsman-equivalent media, and check the solenoid valve for calcium buildup that would cause the next failure.
- Model 1820/1830 Dehumidifiers: The cold coil fins clog with construction dust and pet dander in newer Frisco builds, reducing moisture removal and icing the coil. We apply foaming cleaner with proper dwell time, rinse with low-pressure water, and check the condensate pump for algae - a secondary failure we find in roughly one of three units in this market.
- Model 8100/8120 Energy Recovery Ventilators: The core matrix and filters accumulate pollen and construction particulate that standard maintenance misses. The core must be removed and washed per Aprilaire specs; compressed air damages the membrane. We document core condition with photos because replacement cores run $400-$600 and most owners don’t know they’re serviceable.
- Model 1310/2310/3310 Media Air Cleaners: The MERV 16 media loads unevenly when the cabinet gasket fails, bypassing dirty air directly to the coil and blower. We inspect the gasket seal, replace if degraded, and clean the blower wheel - which collects the bypass debris - rather than just swapping the filter and calling it done.
Our Aprilaire HVAC Cleaning Process
- 1
Written price delivered first. Haven Standard Clause 1: we inspect the Aprilaire unit, identify the specific components needing service, and deliver a written price before work begins. No exceptions.
- 2
Diagnostics with photo baseline. We photograph the coil, blower, and plenum (the main distribution box connecting to your duct runs) before touching anything. The photo is already on your phone before we say what it costs.
- 3
OEM vs. quality aftermarket decision. For Aprilaire water panels, we stock OEM and Guardsman-equivalent media. For electronic air cleaner cells, we use factory-spec cleaning protocols. We name what we’re using and why, and we note what would void any remaining manufacturer warranty.
- 4
Negative-pressure extraction and component cleaning. We seal the air handler cabinet, apply negative-pressure extraction (suction that contains loosened debris), and clean each component with equipment matched to the material - foaming cleaner for coils, specified solution for electronic cells, controlled water pressure for dehumidifier fins.
- 5
Post-clean test and documented record. We measure static pressure across the clean components, run the system through a full cycle, and deliver before-and-after photos of every duct run and component cleaned. The 365-Day Done Right Promise is included in writing.
BeforeAfterWhat Aprilaire HVAC Cleaning Costs in Frisco
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Evaporator coil cleaning (Aprilaire air handler) | $280-$420 | Coil accessibility, fin corrosion level, whether the drain pan needs removal |
| Blower assembly cleaning | $180-$290 | Wheel removal required, bearing condition, debris type (construction dust vs. pet hair) |
| Condenser coil cleaning (outdoor unit) | $160-$240 | Refrigerant line access, fin damage from hail, coil configuration |
| Model 5000 electronic air cleaner service | $220-$340 | Cell count, wire condition, whether pre-filter media also needs replacement |
| Humidifier/dehumidifier cleaning | $150-$260 | Scale severity, solenoid valve condition, pad vs. steam cylinder type |
| Full air handler cleaning (coil + blower + cabinet) | $480-$680 | System size, contamination level, additional components like ERV core |
Every price is flat per system, agreed in writing, with no per-vent add-ons. We also service Lennox, Trane, and Carrier equipment if your system is mixed-brand. Call (940) 290-8552 for an exact quote - estimates are free.
Why Frisco Homeowners Call CleanRun Air Duct Cleaning Frisco for Aprilaire Work
We’ve been running crews in Frisco since 2013, including regular work in Starwood where the 2005-2015 construction tends to hide surprising debris accumulation behind what looks like clean filters. Tomas Reyes, who grew up in the Bronx and learned the trade at Bronx Community College before moving to Texas, still reviews photo records from jobs personally - a habit from fifteen years ago that hasn’t stopped.
Our technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. The equipment roster includes Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - brands you can verify independently. Every job carries the 365-Day Done Right Promise in writing, and we publish our license number openly, not buried in a footer.
We are an independent Aprilaire service provider, not affiliated with or authorized by the manufacturer.
FAQs
No, if the work follows manufacturer specifications and uses approved parts. We document our methods and parts sources so you have a record if a warranty question ever arises. Call (940) 290-8552 if you need us to review your specific model’s warranty terms before scheduling.
We stock both and tell you which we’re using before work starts. For water panels and media filters, we carry OEM and Guardsman-equivalent options; for electronic air cleaner cells, we follow factory cleaning protocols rather than replacement. The written scope names every part.
You receive a Documented Photo Record of every component cleaned, before and after, as a standard deliverable - not upon request, not for an extra fee. If the photo doesn’t show the difference, the job isn’t finished.
Most units fail from maintenance neglect, not component wear. A Model 600 humidifier with a scaled tray and clogged solenoid often returns to full function after proper cleaning for under $260; replacement runs $600-$900 installed. We show you the photos and the written price for both options.
Every three to five years for the air handler and coil, annually for humidifier water panels during hard-water season, and every two years for electronic air cleaner cells in homes with pets or near construction. Frisco’s pollen load and clay dust accelerate loading compared to coastal Texas markets. Call (940) 290-8552 to schedule an inspection and we’ll give you a model-specific interval.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Frisco at CleanRun Air Duct Cleaning Frisco, serving Frisco and nearby areas.