Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAprilaire Duct Repair & Sealing in Frisco: What to Know First
We provide independent Aprilaire duct repair and sealing in Frisco for homeowners with compromised duct runs, disconnected flex lines, or leaking metal seams. Most Aprilaire jobs we handle are completed in a single visit with a written price agreed before any work starts, typically ranging from $340 to $890 depending on the scope. We’re not affiliated with or authorized by Aprilaire; we are an independent Aprilaire service provider with no ties to the manufacturer.
This page is for Frisco homeowners who own Aprilaire air cleaners, humidifiers, or ventilation systems and have noticed uneven temperatures, rising energy bills, or visible duct damage. If your Aprilaire equipment is working but your home still isn’t comfortable, the problem is often in the ductwork that connects to it. Call us at (940) 290-8552 for a free estimate with a written price delivered on the spot.
How Aprilaire Products Fail - and How We Fix Them
- Aprilaire 5000 Series Electronic Air Cleaner: The cabinet seal gasket degrades faster in Frisco’s heat and clay-soil settling cycles, creating a bypass gap that lets unfiltered air leak around the filter media. We replace the gasket with OEM-spec silicone and reseal the cabinet-to-plenum joint with mastic sealant, then pressure-test to confirm zero bypass.
- Aprilaire 600/700 Whole-House Humidifier: The flexible bypass duct connecting the humidifier to the supply plenum cracks at the elbow where Frisco’s temperature swings stress the material. We replace the flex duct with insulated, reinforced line or transition to rigid metal where space allows, then seal all joints with UL-181 tape and mastic.
- Aprilaire 8140/8145 Ventilation Controller: The intake duct run pulls humid outside air through poorly sealed attic connections, causing condensation inside the duct that degrades the damper actuator. We seal the intake path with mastic and mechanical fasteners, replace water-damaged flex, and verify the damper closes fully against backdraft.
- Aprilaire Zoned System Dampers: The barometric bypass damper duct develops leaks at the seam where static pressure peaks, throwing off zone balance and making the Aprilaire control panel throw error codes. We weld or replace the metal bypass duct, recalibrate static pressure, and confirm each zone hits its design CFM.
- Aprilaire Dehumidifier (1820/1830/1850): The dedicated return duct run collapses at hidden sag points in Frisco attics where summer heat softens the flex liner adhesive. We install proper support straps every 4 feet, replace crushed sections, and seal the new connections to protect the dehumidifier’s rated airflow.
Our Aprilaire Duct Repair & Sealing Process
- 1
Visual and camera inspection. We access every duct run connected to your Aprilaire equipment and photograph the interior with a borescope. The photo is already on your phone before I say what it costs.
- 2
Written scope and price. We deliver a single flat price for the complete repair, broken down by line item, under Haven Standard Clause 1. No per-foot add-ons, no “once we’re in there” surprises.
- 3
Parts decision. For Aprilaire-specific components, we use OEM when the warranty is active and quality aftermarket when it isn’t, always noting the source in writing.
- 4
Repair and seal. We execute the repair using mastic sealant, UL-181 tape, mechanical fasteners, or replacement duct as specified. Every joint is sealed; nothing is left to gravity.
- 5
Pressure test and photo record. We verify static pressure and airflow at the Aprilaire unit, then deliver before-and-after photos of every duct run as part of the standard job record.
- 6
Written guarantee. The 365-Day Done Right Promise is printed and signed before we leave. Haven Standard Clause 3: Verified Crews means you know who was in your home.
BeforeAfterWhat Aprilaire Duct Repair & Sealing Costs in Frisco
| Scenario | Typical Range |
|---|---|
| Single flex duct repair/replacement (Aprilaire humidifier bypass) | $340 - $520 |
| Cabinet reseal + gasket replacement (5000 Series air cleaner) | $280 - $410 |
| Multiple duct run sealing with mastic (whole-system) | $620 - $890 |
| Metal duct weld/replace with static recalibration (zoned systems) | $580 - $840 |
What moves the price: accessibility (attic vs. crawlspace), duct material (flex vs. metal), and whether the Aprilaire unit must be temporarily disconnected to access the damage. We also service Lennox, Trane, and Carrier systems with the same flat-price structure. Every estimate is free, every price is written, and every job includes the documented photo record. Call (940) 290-8552.
Why Frisco Homeowners Call CleanRun Air Duct Cleaning Frisco for Aprilaire Work
We’ve been running crews in Frisco since 2013, including regular work in the Starwood neighborhood where older construction tends to hide a surprising amount of accumulated debris. Tomas Reyes, who picked up his trade fundamentals at Bronx Community College before spending years on HVAC systems across the Northeast, has been overseeing CleanRun operations here for well over a decade.
Our technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. The equipment we bring includes Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - brands you can look up before you agree to anything. The 365-Day Done Right Promise is backed in writing on every job, not just stated in marketing copy. And if you have a competitor’s written estimate, we provide a Free Second Opinion at no cost, with our number next to theirs.
FAQs
No, independent duct repair does not void the Aprilaire product warranty as long as OEM parts are used where specified and the work does not alter the unit’s electrical or control systems. We note part sources in writing and can provide documentation if a warranty claim arises later. Call (940) 290-8552 if you need clarity on your specific model.
Repair is viable when the damage is localized to one or two duct runs, the plenum is intact, and static pressure tests within 10% of design. Full replacement makes sense when multiple runs are degraded, the original duct is undersized for your Aprilaire equipment, or previous repairs have created a patchwork that leaks at every joint. We show you the camera footage and give you both options in writing.
We carry common Aprilaire gaskets, bypass duct kits, and damper hardware on our Frisco trucks. Specialty components for older 5000 Series units or discontinued ventilation controllers typically arrive within 24 to 48 hours from regional suppliers. We do not start work until all parts are on hand.
Every job concludes with a Documented Photo Record delivered to you before we leave: inside every duct run, before and after, with timestamps. This has been our practice since 2013. You also receive the written scope, the signed 365-Day Done Right Promise, and post-repair static pressure readings. If the photos don’t match the invoice, Haven Standard Clause 1 applies.
We provide a Free Second Opinion on any written estimate, but we do not match bait-and-switch pricing. If a competitor’s quote is significantly lower, we will show you exactly what their scope omits - typically mastic sealing at hidden joints, support strap replacement, or post-repair pressure testing. Our price is flat per system, agreed in writing, and includes everything required to do the job correctly.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Frisco at CleanRun Air Duct Cleaning Frisco, serving Frisco and nearby areas.